

GFESuite November 14-16, 2001 Training Workshop
for the
IFPS Rapid Prototyping Project
sponsored by
Workshop Details
The workshop is scheduled to take place at FSL from November 14-16.
Details about the workshop may be found at the following links:
Agenda
Workshop
Participants
Presentation Slides
Training
Questionnaire Results
Recommended Prerequisites
This training workshop is not intended for beginning GFE users. This
course does not teach "knobology". It teaches advanced concepts of
the GFE. It is highly recommended that you are already familiar with
the GFE and are familiar with the following concepts:
-
knobology techniques presented in the Essential
GFE Techniques
-
writing smart tools and procedures
-
configuration, including Base,
Site, User concepts as it applies to gfe
and ifpIMAGE
configuration files, and serverConfig and localConfig files.
-
the material in the following training guides:
-
GFE
Spatial Editor Training Guide
-
GFE
Grid Manager Training Guide
-
GFE
Temporal Editor Training Guide
-
GFE
Smart Tools Training Guide
Software Build
The software version that will be taught at the workshop is RPP14, which
is planned to have a release date of early November. The equivilant
AWIPS version is 5.2.1./5.2.2.
Logistics
Location of Workshop
The workshop will start promptly at 830am on Wednesday November 14th in
the David Skaggs Research Center (DSRC) room GC402. This is the multi-purpose
room in the lower-level. The building location is on the NOAA/NIST
campus at 325 Broadway, Boulder, CO.
Registration
If you wish to be a participant, please contact your regional representative
for this workshop. The regions will contact FSL to sign up their
people. The regional representatives for attending this workshop
are:
| Eastern Region |
Southern Region |
Central Region |
Western Region |
Others (NWSTC, Alaska, Hawaii, NWSH) |
| Ross Dickman, ERH |
Ken Waters, SRH |
Jeff Manion, CRH |
Andy Edman, WRH |
Mark Mathewson, FSL |
| I.Ross.Dickman@noaa.gov |
Ken.Waters@noaa.gov |
Jeffrey.Manion@noaa.gov |
Andy.Edman@noaa.gov |
Mark.A.Mathewson@noaa.gov |
| (631) 244-0104 |
(817) 978-2671 |
(816) 426-5672 |
(801) 524-5131 |
(303) 497-6713 |
There are a limited number of slots available for this workshop. The
participants that are registered are listed on the attendees
page.
Hotel
A block of rooms have been reserved for you at the Broker Inn, which is
conveniently located nearby to the DSRC building. When calling to make
reservations, please tell them that you are with the National Weather
Service workshop. The room rate is $93.00 per day, which
is a couple of dollars over the allowable per diem. It is about a 10 minute
walk from the Broker Inn to the DSRC building. Phone number for the Broker
Inn is 303-444-3330.
Additional
visitor information about FSL may be found here.
Cars/Buses
There is good, frequent public transportation to/from the Denver
International Airport to Boulder hotels. There is both a regional
RTD bus, and several
van companies.
Security
Due to heightened security, please be sure to bring your NOAA badge with
you to this workshop.
Presentation Slides
The slides to be presented at the training are available at the following
links:
Welcome
and RPP Progress over the last 2 years
New
Features of GFESuite
Intersite
Coordination
Questions
and Answers
Tips
and Tricks with the GFE
Smart
Tools
Smart
Initialization
Text
Product Infrastructure
ifpIMAGE